Allen-Bradley · CNC Controls
Allen-Bradley 700L 2094-BC12-M06-E repair
Send the Allen-Bradley 700L 2094-BC12-M06-E for diagnosis and repair, or have an engineer come to the plant. Repair keeps the original CNC control unit, its settings and its wiring in place.
Cost confirmed before any work starts · Warranty of 30 days to 6 months
At a glance
The Allen-Bradley 700L 2094-BC12-M06-E
- Manufacturer
- Allen-Bradley
- Model / part number
- 700L 2094-BC12-M06-E
- Also searched as
- 700L2094BC12M06E · 700L 2094 BC12 M06 E
- Category
- CNC Controls
- Service
- Diagnosis and component-level repair, onsite or ship-in
- Warranty
- 30 days to 6 months, confirmed before work starts
Allen-Bradley is Rockwell Automation's brand for PLCs, drives, operator panels and motion control. ControlLogix, CompactLogix, SLC 500 and PLC-5 controllers, PowerFlex drives and PanelView terminals are widely installed in Indian plants, including many older systems that are no longer sold.
Common faults
What usually fails on a unit like the 700L 2094-BC12-M06-E
CNC controls combine a computer, operator display, I/O and axis drives. Faults in any one stop the machine, and the parameters and machine data have to survive the repair. Control units, displays, I/O boards and amplifiers can be repaired at board level.
Control unit won't boot
Power supply faults, a flat backup battery or corrupted memory stop the control at power-up.
Display and keyboard faults
Dead or dim displays, failed CRT-to-LCD units and unresponsive operator keys.
Axis and spindle amplifier alarms
Overcurrent, overload and feedback alarms from the amplifiers or the motors they drive.
I/O link and interface faults
Loss of communication with machine I/O, causing emergency-stop or ready alarms.
Lost parameters
Machine data lost through a failed battery or memory, leaving axes unconfigured.
First checks
What to check before calling an engineer
Isolate and lock out the supply, and wait for stored energy to discharge, before opening anything.
Safe for plant staff
- Record all alarm numbers shown on the screen.
- Keep the backup battery fresh, and change it with the control powered on where the maker says to.
- Back up parameters, programs and PLC data while the control works.
Leave to a specialist
- Restoring machine data and parameters.
- Board-level repair of control units and amplifiers.
- Reference-point and axis set-up after a repair.
Getting it fixed
How to get the 700L 2094-BC12-M06-E repaired
What to send with it
- The failed unit or board, with the machine model.
- All alarm numbers and the control's software version.
- A parameter and data backup.
Onsite or ship-in
Technicians work onsite from our Hyderabad base and travel to plants across India; anything that can be removed can also be sent to MachineryFix from anywhere in the country.
Warranty. Repairs carry a warranty of 30 days to 6 months, depending on the item and the repair; the exact term is confirmed before work starts.
FAQ
700L 2094-BC12-M06-E repair questions
What happens to the machine parameters when the Allen-Bradley 700L 2094-BC12-M06-E is repaired?+
Repairs don't normally clear them, but a control that has lost its battery or memory will need them restored. Always keep and send a current backup.
Does the Allen-Bradley 700L 2094-BC12-M06-E have to be sent in, or can an engineer come to the plant?+
Either. An engineer can diagnose it in place and repair it there or take it away, or the unit can be sent to MachineryFix from anywhere in India. The diagnosis and repair cost are confirmed before any work starts.
Is MachineryFix connected to Allen-Bradley?+
No. Allen-Bradley and the model name are used only to identify the equipment. MachineryFix is an independent repair service and is not affiliated with or endorsed by Allen-Bradley.
Same manufacturer
Other Allen-Bradley CNC Controls
Allen-Bradley and 700L 2094-BC12-M06-E are named only to identify the equipment. MachineryFix is not affiliated with or endorsed by Allen-Bradley.
700L 2094-BC12-M06-E down?
Send the fault and what the machine was doing. We'll match an engineer who works on it.