MachineryFix

Brand Service · Germany

Siemens repair & service.

SINAMICS drives, SIMATIC PLCs & SINUMERIK CNC

Book a TechnicianCall +91 70751 47888

01 / Overview

Siemens service across India

Siemens is the most widely installed automation brand across Indian process and manufacturing plants, and also the one factories most often struggle to get serviced quickly — genuine spares and TIA Portal experience are not evenly available in the market. MachineryFix technicians work daily on SINAMICS and MICROMASTER drives, SIMATIC S7 PLCs, Comfort Panel HMIs and SINUMERIK controls, from our Hyderabad base and through our technician network nationwide.

We diagnose to the component and the parameter set rather than swapping whole units, take a full project and parameter backup before any work, and load-test on the bench before reinstalling — so a repaired Siemens drive or PLC returns to the line with its commissioning intact.

02 / Services

Siemens services we provide

Pick a service for models covered, fault codes and process.

Siemens VFD RepairDrives & Motor ControlSiemens AC Drive RepairDrives & Motor ControlSiemens Servo Drive RepairDrives & Motor ControlSiemens PLC Repair & ProgrammingAutomation ProgrammingSiemens Control Panel RepairControl & Power PanelsSiemens CNC Controller RepairCNC & Machine ToolsSiemens HMI ProgrammingAutomation ProgrammingSiemens SCADA IntegrationAutomation Programming

03 / Tools

Diagnostic & programming tools

We work in the same software your Siemens equipment was commissioned with.

TIA PortalSTEP 7STARTERSINAMICS StartdriveWinCC

04 / Why us

Why factories call us for Siemens

ADV_01

Brand-Trained Engineers

Technicians who work daily on Siemens tools and fault codes.

ADV_02

Config Backup First

Parameters and programs backed up before any hardware work.

ADV_03

Component-Level Repair

Faults traced to the failing part, not the whole unit.

ADV_04

Pan-India Dispatch

Verified technicians nationwide — under 4 hours in Hyderabad, 24/7 for emergencies.

ADV_05

End-of-Life Support

We keep obsolete Siemens equipment running and migrate when needed.

ADV_06

Documented Handover

Digital service report on every job for your compliance records.

05 / Questions

Frequently asked questions

Do you service all Siemens equipment?+
We cover Siemens's main industrial ranges — vfd repair, ac drive repair, servo drive repair, plc repair & programming, control panel repair, cnc controller repair, hmi programming, scada integration. Tell us the exact model when you raise a request and we match a technician experienced on that Siemens platform.
Are your technicians trained on Siemens software?+
Yes. Our engineers work in TIA Portal, STEP 7, STARTER and the rest of the Siemens toolchain, so we can back up, diagnose and re-commission your equipment properly — not just swap boards.
How fast can you get a Siemens technician onsite?+
We're a verified-technician network serving factories across India from our Hyderabad base — under 4 hours in Hyderabad's industrial clusters, and onsite in hours through local technicians in other regions, 24/7 for emergency Siemens breakdowns. Where workshop repair is needed we collect, repair and reinstall with full load testing.

Written & reviewed by MachineryFix Engineering Team — last reviewed

06 / Other brands

We service every major brand

ABBACS drives, AC500 PLCs & 800xA systemsSchneider ElectricAltivar drives, Modicon PLCs & Lexium servoAllen-BradleyPowerFlex drives, ControlLogix PLCs & Kinetix servoMitsubishi ElectricFR drives, MELSEC PLCs, MELSERVO & GOT HMIsDeltaVFD-series drives, DVP/AS PLCs & ASDA servoYaskawaV1000/A1000 drives, Sigma servo & MP motionFANUCSeries 0i/30i CNC, alpha-i servo & spindle drives

Siemens equipment down?

Verified Siemens technicians dispatched across India — under 4 hours in Hyderabad, 24/7 nationwide.

Book a TechnicianCall +91 70751 47888