Heidelberg · Sensors & Field Instruments
Heidelberg DIPM220-1 repair
Get the Heidelberg DIPM220-1 repaired rather than replaced. It is matched to an engineer who works on Heidelberg field instruments, and the cost is confirmed before work starts.
Cost confirmed before any work starts · Warranty of 30 days to 6 months
At a glance
The Heidelberg DIPM220-1
- Manufacturer
- Heidelberg
- Model / part number
- DIPM220-1
- Also searched as
- DIPM2201 · DIPM220 1
- Description
- Board, printing machine circuit
- Category
- Sensors & Field Instruments
- Service
- Diagnosis and component-level repair, onsite or ship-in
- Warranty
- 30 days to 6 months, confirmed before work starts
Heidelberg printing presses, including Speedmaster, Printmaster and GTO machines, carry many machine-specific control, drive and interface boards. Spares for older presses are often hard to source, which makes board repair the practical option.
Common faults
What usually fails on a unit like the DIPM220-1
Field instruments fail in their electronics, sensor element or housing, and the reading has to be right after repair. Transmitters, analysers, detectors and their electronic modules can be repaired and checked against a reference.
No output or fixed output
Failed electronics module, power supply or loop interface.
Drift and wrong readings
Ageing sensor elements, contamination or damaged input circuits.
Moisture ingress
Water in the housing or terminal box, especially through the monsoon.
Display and communication faults
Dead local displays and HART or fieldbus communication errors.
Detector faults
Gas, flame and metal detectors failing self-test or giving false alarms.
Board-level repair
This is repaired at component level: the board is traced, the failed parts are replaced, and the board is tested with its inputs and outputs before it is returned.
First checks
What to check before calling an engineer
Isolate and lock out the supply, and wait for stored energy to discharge, before opening anything.
Safe for plant staff
- Check the loop supply and wiring.
- Note the reading against a known value, if one is available.
- Check housings and cable glands for water.
Leave to a specialist
- Repair and calibration of electronics.
- Work in hazardous areas.
- Changing ranges and configuration.
Getting it fixed
How to get the DIPM220-1 repaired
What to send with it
- The instrument or its electronics module.
- Its tag, range and configuration if known.
- The process it measures.
Onsite or ship-in
Technicians work onsite from our Hyderabad base and travel to plants across India; anything that can be removed can also be sent to MachineryFix from anywhere in the country.
Warranty. Repairs carry a warranty of 30 days to 6 months, depending on the item and the repair; the exact term is confirmed before work starts.
FAQ
DIPM220-1 repair questions
Is the Heidelberg DIPM220-1 calibrated after repair?+
Its output is checked against a reference over its range. A formal calibration certificate can be arranged where the plant needs one.
Does the Heidelberg DIPM220-1 have to be sent in, or can an engineer come to the plant?+
Either. An engineer can diagnose it in place and repair it there or take it away, or the unit can be sent to MachineryFix from anywhere in India. The diagnosis and repair cost are confirmed before any work starts.
Is MachineryFix connected to Heidelberg?+
No. Heidelberg and the model name are used only to identify the equipment. MachineryFix is an independent repair service and is not affiliated with or endorsed by Heidelberg.
Other manufacturers
Sensors & Field Instruments from other makers
Heidelberg and DIPM220-1 are named only to identify the equipment. MachineryFix is not affiliated with or endorsed by Heidelberg.
DIPM220-1 down?
Send the fault and what the machine was doing. We'll match an engineer who works on it.