Honeywell · Control Boards & PCBs
Honeywell HD-NVR-116 repair
Component-level repair for the Honeywell HD-NVR-116 (network video recorder), onsite or sent in from anywhere in India. The diagnosis and repair cost are confirmed before any work starts.
Cost confirmed before any work starts · Warranty of 30 days to 6 months
At a glance
The Honeywell HD-NVR-116
- Manufacturer
- Honeywell
- Model / part number
- HD-NVR-116
- Also searched as
- HDNVR116 · HD NVR 116
- Description
- Network video recorder
- Category
- Control Boards & PCBs
- Service
- Diagnosis and component-level repair, onsite or ship-in
- Warranty
- 30 days to 6 months, confirmed before work starts
Honeywell equipment in plants includes Experion and TDC process control hardware, process controllers and recorders, transmitters, and burner and combustion controls.
Common faults
What usually fails on a unit like the HD-NVR-116
Control, interface and processor boards inside printing presses, chillers, compressors and special-purpose machines are often unavailable or very expensive as spares. Board-level repair finds the failed components and returns the original board.
On-board power faults
Failed regulators, DC-DC converters and capacitors stop the board or cause random resets.
Damaged inputs and outputs
Driver transistors, opto-couplers and relays damaged by shorts or surges in machine wiring.
Processor and memory faults
Failed processors, memory or corrupted firmware stop the board working.
Connector and track damage
Corrosion, burnt tracks and cracked solder joints, often from heat, vibration or moisture.
Communication faults
Failed serial, CAN or network interfaces between boards.
Communication
Communication faults can be in the module, the cable or the network configuration. The module is tested on a live link after repair; the cabling and terminations at site are worth checking too.
First checks
What to check before calling an engineer
Isolate and lock out the supply, and wait for stored energy to discharge, before opening anything.
Safe for plant staff
- Photograph connectors, jumpers and switches before removing the board.
- Note error messages from the machine.
- Check the supply voltages reaching the board.
Leave to a specialist
- Component-level fault-finding and repair.
- Testing the board with its inputs and outputs simulated.
- Firmware and memory work.
Getting it fixed
How to get the HD-NVR-116 repaired
What to send with it
- The board, packed against static.
- The machine make and model it comes from.
- The fault and any error message.
Onsite or ship-in
Technicians work onsite from our Hyderabad base and travel to plants across India; anything that can be removed can also be sent to MachineryFix from anywhere in the country.
Warranty. Repairs carry a warranty of 30 days to 6 months, depending on the item and the repair; the exact term is confirmed before work starts.
FAQ
HD-NVR-116 repair questions
Can the Honeywell HD-NVR-116 be repaired without a circuit diagram?+
Usually, yes. Boards are traced and tested at component level. A known-good board for comparison helps but is not required.
Does the Honeywell HD-NVR-116 have to be sent in, or can an engineer come to the plant?+
Either. An engineer can diagnose it in place and repair it there or take it away, or the unit can be sent to MachineryFix from anywhere in India. The diagnosis and repair cost are confirmed before any work starts.
Is MachineryFix connected to Honeywell?+
No. Honeywell and the model name are used only to identify the equipment. MachineryFix is an independent repair service and is not affiliated with or endorsed by Honeywell.
Same manufacturer
Other Honeywell Control Boards & PCBs
Other manufacturers
Control Boards & PCBs from other makers
Honeywell and HD-NVR-116 are named only to identify the equipment. MachineryFix is not affiliated with or endorsed by Honeywell.
HD-NVR-116 down?
Send the fault and what the machine was doing. We'll match an engineer who works on it.